Scanfob® 2002 Laser Barcode Scanner Support
"The Scanfob® 2002 Bluetooth barcode reader is simply the best choice..." --Christophe Orceau - customer testimonials.
Scanfob® 2002 Mobile Laser Barcode Scanner
Frequently Asked Questions about the Scanfob® 2002
How to setup the Scanfob® 2002 scanner on Android 2.1+ devices.
Download Windows USB drivers to connect Scanfob® 2002 for use in cabled mode (with or without SerialMagic)
Download and print the Scanfob® 2002 Setup Document with SPP and HID setup barcodes.
(SPP=Serial Port Profile, HID=Human Interface Device)
Print the barcodes for wireless connecting and disconnecting the Scanfob 2002 with SerialMagic:
Scan "Connectable" when pairing and connecting with SerialMagic software
Scan "Disconnect" will disconnect the Scanfob® 2002 Bluetooth radio and turn the Bluetooth radio off
Hint: Print these codes and tape them (under clear tape) on the back of the Android phone or Tablet.
Print the barcode for pairing the Scanfob 2002 in Bluetooth keyboard mode: iOS, OS X, Windows, etc. (when NOT using SerialMagic)
Scan "Connectable" when Pairing to iOS, OS X, Windows, etc. - in Bluetooth keyboard mode
Print the barcodes for wireless reconnecting and reconnecting the Scanfob 2002 in keyboard mode:
Scan "Disconnect" will disconnect the Scanfob® 2002 Bluetooth radio and turn the radio off
Scan "Reconnect" to reconnect since last connection to iOS, OS X, Windows, etc. - in keyboard mode
Hint: Print these codes and tape them (under clear tape) on the back of the iPad, iPhone, iPod Touch, Mac, PC
Note: When you connect the Scanfob 2002 to one device e.g. iPhone, then connect to another device, you must pair it again to connect back to the original the original device to use it again. Reconnect ONLY works when reconnecting with the LAST device the Scanfob was Bluetooth connected with.
Troubleshooting an issue with the Scanfob® 2002
Other Configuration Options for the Scanfob® 2002
Print the barcodes for setting Scanfob UPC to EAN Translation
Print the barcodes for setting Scanfob® 2002 scanner on a USB cable connection:
Scan "USB Keyboard" to use the Scanfob® 2002 barcode scanner like a keyboard on a USB cable connection.
Scan "USB Virtual Com" to use the Scanfob® 2002 barcode scanner with SerialMagic software on a USB cable connection.
Print common control barcodes for Scanfob® 2002 prefix/suffix in Keyboard mode:
Scan "Data Only" and the Scanfob® 2002 will send only barcode data, NO prefix, NO suffix
Scan "Data then CR" and the Scanfob® 2002 will send barcode value then CR (use for Safari iOS)
Scan "Data then ENTER" and the Scanfob® 2002 will send barcode value then ENTER (use for Safari OS X)
Scan "Data then TAB" and the Scanfob® 2002 will send barcode value then TAB
Scan "Data then COMMA" and the Scanfob® 2002 will send barcode value then COMMA
Print common control barcodes for Scanfob® 2002 prefix/suffix in SerialMagic mode:
Scan "Data then CR" and the Scanfob® 2002 will send barcode value then CR (use for Safari iOS)
Scan "Data then ENTER" and the Scanfob® 2002 will send barcode value then ENTER (use for Safari OS X)
Scan "Data then TAB" and the Scanfob® 2002 will send barcode value then TAB
Scan "Data then HT" and the Scanfob® 2002 will send barcode value then HORIZONTAL TAB
Scan "Data then COMMA" and the Scanfob® 2002 will send barcode value then COMMA
Print the barcodes for setting scanner batch mode options:
Scan "Store scans" to have the Scanfob® 2002 save scans to scanner memory*
Scan "Store scans & timestamp" to have the Scanfob® 2002 save scans & timestamp to scanner memory*
Scan "Send scans" to send scans from Scanfob® 2002 memory
Scan "Erase scans" to erase scans from Scanfob® 2002 memory
Scan "CR after scan" for Scanfob® 2002 to send scan followed by a new line (no prefix characters)
Scan "Real-Time only" for Scanfob® 2002 to disable batch mode (will not store scans to memory)
*Note: scans are stored to memory even when sent in real-time over the cable.
Print barcodes to turn on/off constant scanning mode:
Scan "Scan Always" and the KeyBatch BR1
laser will always be active scanning.
Scan "Press To Scan" and
KeyBatch BR1
will scan only when scan button pressed (normal mode).
Setup Scanfob® 2002 scanner Roaming Mode (batch) for HID posting with optional timestamp information: Download and print this
Setup Scanfob® 2002 prefix/suffix characters - Full : Download and print this
Click here to print the Scanfob® 2002 control barcodes for UPC-A options
or Download and print this for the UPC-A control barcode options
Click here to print the Scanfob® 2002 control barcodes for UPC-E options
or Download and print this for the UPC-E control barcode options
Scanfob® 2002 Enable or Disable Barcode Symbologies: Download and print this
Scanfob® 2002 Miscellaneous Configuration options: Download and print this
Restoring Factory Defaults to the Scanfob® 2002: Download and print this
Setup Scanfob® 2002 Bluetooth PIN code: Download and print this
Setup Scanfob® 2002 beeper: Download and print this
Other Convenient Control codes
Print control barcode to setup Scanfob® 2002 to send barcode data followed by CR (carriage return) LF (line feed)
Scan "Data then CRLF" and the Scanfob® 2002 will send barcode value then CR LF (Use with Nikon D300s camera interface)
Control barcode to enable the Scanfob® 2002 for use with the Blackberry PlayBook (print and scan)
Control barcode to enable GS1 DataBar stacked barcodes (print and scan) - What's this 