BlueSnap M6A RS232 Adapter Mode Change BLE/HID

BlueSnap M6A wireless RS-232 adapter by default ships in BLE mode.

To change BlueSnap M6A to HID mode (keyboard simulation), the M6A must have the BLE-HID firmware option installed at purchase.

To change the BlueSnap M6A wireless mode, you must use yACK BLE app on Adroid or iOS.
Note M6A Bluetooth RS-232 adapter can work also on Windows 10, and MacOS, but mode change must be done with yACK BLE.

Load the yACK BLE app from serialio.com or Play.

Android

Connect the M6A to yACK BLE, Tap 3-Dot menu > Set Wireless Mode

BlueSnap M6A Bluetooth RS-232 Adapter BLE-HID Mode Change

 

Tap the desired wireless mode to set the BlueSnap M6A.
Note: Choose "HID iOS" mode for Android HID, and for MacOS HID (keyboard simulation modes)

Wireless Bluetooth RS232 Adapter HID (keyboard) mode or BLE mode

 

When the BlueSnap M6A is in HID mode, the orange LED will blink simultaneous with the green LED.

Wireless Bluetooth RS-232 adapter HID Keyboard Simulation mode

iOS

Tap as shown below 1 and 2, then Set Wireless Mode

Wireless Bluetooth RS232 Adapter HID (keyboard) mode or BLE mode iOS iPhone iPad iPod Touch
BlueSnap