Serialio

Sales: (512) 994-3630 | Support: (512) 994-3268
Menu

SUPPORT

QUICK RESOURCES

Menu

Support Topics

Menu

Forklift Enabled by Employee Badge

Ensure safety and compliance for your company forklift operations so only properly trained and authorized forklift drivers can use equipment. Driving the forklift is enabled by an employee badge scan. One manufacturing company forklift report showed an operator drove the forklift for 56 hours straight. You can see obviously that’s not what was happening. First, this company’s prior solution was forklift operator use was enabled Bluetooth Beacons. Secondly, the beacon was detected and authenticated by their on-board Android application to register usage and task completion. Thirdly, the company failed to

Read More »

idChamp® NF4x LED & Button Descriptions

NF4x has one physical button for power on/off and functionality, and one micro-USB connector for power/charging. Battery model: Press the button briefly to power on the unit. Press and hold the button and Connection LED will blink briefly, then stop blinking, when blinking stops, release the button and NF4x will power off. Kiosk model: Plug micro-USB cable (regulated 5V) and the unit will power on.    When power is applied the power/charge LED will illuminate. For battery model this LED will change to green when the unit is fully charged.  

Read More »

Sending Wireless Bluetooth Data Using 3rd Party Keyboard SerialMagic Keys

How can iOS keyboard be used to send user specified data to a wirelessly connected device?  SerialMagic Keys iOS provides a ‘Command Key’ option to send user defined data to trigger some event on the device connected to BlueSnap M6A DB9 connector serial port e.g. to trigger scale to send weight, RFID reader to read tag, sensor to take measurement, barcode scanner to read barcode, etc.   Open SerialMagic Keys app on iPhone, iPad, iPod Touch, then tap on “Command Key” Choose the wireless device that SerialMagic Keys will send

Read More »

Smartphone Wallet Attendance Check-in

Why Smartphone Wallet Attendance Check-in You do smartphone wallet attendance check-in with secure credential stored in smartphone’s wallet. Your credential is stored in your Apple Wallet when you have an iPhone. You check-in to your meeting or event using your iPhone or Apple Watch. Your unique credential is securely stored in the smartphone wallet then you don’t carry your physical employee badge to check-in. Check-in for your meeting, class, and membership, use for tool and equipment check-out, everything your badge can do, your phone can do with soft credential stored

Read More »

How to setup the idChamp 1126/1128 with SerialMagic Professional for Windows

This support article will show you how to configure SerialMagic Professional for Windows for use with the idChamp UHF 1126/1128. This tutorial is applicable to both the idChamp UHF 1126 desktop scanner and the idChamp UHF 1128 scanner. 1. Plug your idChamp 1126/1128 into your Windows PC via the micro USB cable that came with it in the box. 2. Download and install SerialMagic Professional for Windows if you have not already done so. 3. Launch SerialMagic Professional and click on “Add” to add a new connection. 4. Select “Cabled

Read More »

RS3 NFC Setup App (iOS) Setup idChamp RS3

For the idChamp RS3x see this page. This post shows how to use RS3 NFC Setup iOS app to load an hwg+ file to the idChamp RS3. If you do not have access to an iOS device, you can also setup the idChamp RS3 with the RS3 NFC Setup application for Android or pcProx configuration utility for Windows. idChamp RS3-HSE Diagram DIP Switch Orientation   1 2 3 4 5 6 S2 Down Down Up Up Down Down S3 Up Up Down Down     S4 Down Up Down Up  

Read More »

RS3 NFC Setup App (Android) Setup idChamp RS3

This support article will walk you through how to use Serialio’s RS3 NFC Setup application for Android to configure your idChamp RS3. If you do not have access to an Android device, you can also configure your idChamp RS3 with the RS3 NFC Setup application for iOS or pcProx Configuration Utility for Windows. idChamp RS3-HSE Diagram DIP Switch Orientation   1 2 3 4 5 6 S2 Down Down Up Up Down Down S3 Up Up Down Down     S4 Down Up Down Up     S5 Down Down

Read More »

Setup idChamp RS3 BLE mode (Post August 2019)

NOTE: RS3 Has been discontinued. See the RS3x These instructions are for RS3 units built after August 2019. These units will have a white UART connector on the PCB board next to banks S4 and S5. RS3 Getting Started To prepare your idChamp RS3 for BLE mode, follow the instructions below.  You’ll need a Phillips head screwdriver and a paper clip or small tool for changing the DIP switches. In order to access all DIP switches, you’ll need to remove the outside case entirely. You can do this by removing

Read More »

Setup idChamp RS3 BLE mode (Pre August 2019)

NOTE: This product is discontinued. See the RS3xThese instructions are for units built BEFORE August 2019. These units will NOT have a white UART connector on the PCB board next to banks S4 and S5 Getting Started To prepare your idChamp RS3 for BLE mode, follow the instructions below.  You’ll need a Phillips head screwdriver and a paper clip or small tool for changing the DIP switches. In order to access all DIP switches, you’ll need to remove the outside case entirely. You can do this by removing the lid,

Read More »

How To Setup idChamp® RS3x Switches

The idChamp® RS3x RFID-NFC reader is a wireless BLE device. With optional HID firmware, it can optionally work in wireless HID mode. Instructions Power off your RS3x, remove the four lid screws, then remove the lid. Locate switches S3, S5. Use a small plastic device to change the switch settings if needed. Note: Image below shows the RS3x DIP switches for battery operation (power on/off with RS3x button). For RS3x kiosk mode, S3-3 is ON.   1 2 3 4 5 6 S3 ON ON OFF OFF N/A N/A S5

Read More »