Serialio

Sales: (512) 994-3630 | Support: (512) 994-3268
Menu

SUPPORT

QUICK RESOURCES

Menu

Support Topics

Menu

idChamp RS3x Setup Android with RS3 NFC Setup

This post shows how to use RS3 NFC Setup Android app to load an hwg+ file to the idChamp RS3x. If you do not have access to an Android device, you can also setup the idChamp RS3x with the RS3 NFC Setup application for iOS or pcProx configuration utility for Windows. See this page for DIP switch settings. Connect RS3x using RS3 NFC Setup App 1. If you have not already done so, download the “RS3 NFC Setup” App from the Google Play. 2. Power on your RS3x. 3. Launch the RS3

Read More »

idChamp RS3x Setup iOS with RS3 NFC Setup

This post shows how to use RS3 NFC Setup iOS app to load an hwg+ file to the idChamp RS3x. If you do not have access to an iOS device, you can also setup the idChamp RS3x with the RS3 NFC Setup application for Android or pcProx configuration utility for Windows. See this page for DIP switch settings. Pair with the RS3 NFC Setup App 1. If you have not already done so, download the RS3 NFC Setup App from the Apple Appstore 2. Launch RS3 NFC Setup app and tap

Read More »

Save RS3x Settings

You want to save the idChamp RS3x RFID reader NFC profile configuration settings to load on another RS3x. First load the RS3 NFC Setup App to your Android device. You can get this app on Google Play. Open the RS3 NFC Setup app and use menu, then Select Device, and select the RS3 to connect the RFID reader. After connected, you select NFC2, NFC3, NFC4 from the app drop-down. After each selection wait for the reading of each profile to complete before you select the next one. Finally, tap menu

Read More »

RS3x DIP Switch Settings for BLE & HID Modes

You set idChamp® RS3x RFID-NFC reader for different operating modes with DIP switch settings.  On this page you see how you setup the RS3x DIP switch settings for BLE & HID modes. You setup RS3x RFID engine using the RS3 NFC Setup iOS app. In addition, you setup RS3x RFID engine using the RS3 NFC Setup Android app. Note: the RS3x model RFID-NFC reader switch settings differ from the RS3 model. See here for setting RS3x switches in cabled mode. DIP Switch Setting Images For BLE Mode DIP switches S3 and S5

Read More »

RS3x DIP Switch Settings for Cabled Mode

You set idChamp® RS3x RFID-NFC reader DIP switch settings for different operating modes. Firstly, option 1 is to setup RS3x RFID engine using the RS3 NFC Setup iOS app. Secondly, you can setup RS3x RFID engine using the RS3 NFC Setup Android app. Finally you use cabled mode to setup the RFID-NFC engine with a Windows PC. For example, cabled mode you will use to setup the RS3x with the pcProxConfig app on Windows. When you use cabled mode, a USB RS-232 adapter is needed, along with an idChamp bridge

Read More »

Mining Site Safety Compliance

How does the 2nd largest major mining company in North America manage their on-site personnel?Using idhamp® RFID readers to facilitate mining site safety compliance at the 2nd largest mining company in North America. Why Tracking On-Site Personnel Is Important Knowing your employees locations is important for their safety. Additionally your contractors, visitors and guests also appreciate your concern for their safety. Finally your government likely requires mining site safety compliance of your personnel management system. Multi-Site Mining Personnel Management Problem How do you rate your company’s mining site personnel management?Your

Read More »

RS3 NFC Setup App (iOS) Setup idChamp RS3

For the idChamp RS3x see this page. This post shows how to use RS3 NFC Setup iOS app to load an hwg+ file to the idChamp RS3. If you do not have access to an iOS device, you can also setup the idChamp RS3 with the RS3 NFC Setup application for Android or pcProx configuration utility for Windows. idChamp RS3-HSE Diagram DIP Switch Orientation   1 2 3 4 5 6 S2 Down Down Up Up Down Down S3 Up Up Down Down     S4 Down Up Down Up  

Read More »

RS3 NFC Setup App (Android) Setup idChamp RS3

This support article will walk you through how to use Serialio’s RS3 NFC Setup application for Android to configure your idChamp RS3. If you do not have access to an Android device, you can also configure your idChamp RS3 with the RS3 NFC Setup application for iOS or pcProx Configuration Utility for Windows. idChamp RS3-HSE Diagram DIP Switch Orientation   1 2 3 4 5 6 S2 Down Down Up Up Down Down S3 Up Up Down Down     S4 Down Up Down Up     S5 Down Down

Read More »

Setup idChamp RS3 BLE mode (Post August 2019)

NOTE: RS3 Has been discontinued. See the RS3x These instructions are for RS3 units built after August 2019. These units will have a white UART connector on the PCB board next to banks S4 and S5. RS3 Getting Started To prepare your idChamp RS3 for BLE mode, follow the instructions below.  You’ll need a Phillips head screwdriver and a paper clip or small tool for changing the DIP switches. In order to access all DIP switches, you’ll need to remove the outside case entirely. You can do this by removing

Read More »

Setup idChamp RS3 BLE mode (Pre August 2019)

NOTE: This product is discontinued. See the RS3xThese instructions are for units built BEFORE August 2019. These units will NOT have a white UART connector on the PCB board next to banks S4 and S5 Getting Started To prepare your idChamp RS3 for BLE mode, follow the instructions below.  You’ll need a Phillips head screwdriver and a paper clip or small tool for changing the DIP switches. In order to access all DIP switches, you’ll need to remove the outside case entirely. You can do this by removing the lid,

Read More »